Movahed Machinery :: Can Making Standards

STANDARDS FOR SANITARY CAN ENDS (LIDS)
January 1, 1970

STANDARDS FOR SANITARY CAN ENDS (LIDS)

Industry Standards for Can Ends recommended for proper can seaming.
The seam quality produced by the Can Seamer is greatly dependant on the quality of the
Cans & Ends used.

NOMINAL DIAMETER	A CURL DIAMETER	B COUNTERSINK DIAMETER		C COUNTERSINK RADIUS	D COUNTERSINK DEPTH	E ENDS PER 2 INCHES	F CURL OPENEING	G EMBOSSING PANEL DIA.
NOMINAL DIAMETER	A CURL DIAMETER	GO	NO GO	C COUNTERSINK RADIUS	D COUNTERSINK DEPTH	E ENDS PER 2 INCHES	F CURL OPENEING	G EMBOSSING PANEL DIA.
202 (52)	61.24 (2.411)	51.92 (2.044)	52.04 (2.049)	0.94 (0.037)	2.62-2.90 (.103-.114)	28	3.33 (0.131)	26.19 (1.031)
207.5 (60)	69.01 (2.717)	59.44 (2.340)	59.59 (2.346)	0.94 (0.037)	2.84-3.12 (.112-.123)	27	3.33 (0.131)	28.80 (1.134)
208 (61)	69.80 (2.748)	60.20 (2.370)	60.35 (2.376)	0.94 (0.037)	2.84-3.12 (.112-.123)	27	3.58 (0.141)	32.28 (1.271)
211 (65)	74.70 (2.941)	64.95 (2.557)	<65.10 (2.563)	0.94 (0.037)	2.84-3.12 (.112-.123)	27	3.58 (0.141)	32.238 (1.271)
300 (73)	82.50 (3.248)	72.47 (2.853)	<72.62 (2.859)	0.94 (0.037)	2.84-3.12 (.112-.123)	27	3.58 (0.141)	32.238 (1.271)
301 (74)	83.77 (3.298)	73.69 (2.901)	73.84 (2.907)	0.94 (0.037)	2.84-3.12 (.112-.123)	27	3.58 (0.141)	32.238 (1.271)
303 (78)	87.17 (3.432)	76.94 (3.029)	77.09 (3.305)	0.94 (0.037)	2.84-3.12 (.112-.123)	27	3.58 (0.141)	32.238 (1.271)
401 (99)	109.09 (4.295)	98.65 (3.884)	98.81 (3.890)	0.94 (0.037)	2.84-3.12 (.112-.123)	27	3.58 (0.141)	47.96 (1.888)
404 (105)	115.52 (4.548)	104.83 (4.127)	104.98 (4.133)	0.94 (0.037)	2.84-3.12 (.112-.123)	27	3.58 (0.141)	50.80 (2.00)
502 (127)	136.91 (5.390)	126.11 (4.965)	126.26 (4.971)	0.94 (0.037)	2.84-3.12 (.112-.123)	27	3.58 (0.141)	63.50 (2.50)
603 (153)	164.26 (6.467)	153.01 (6.024)	153.16 (6.030)	0.94 (0.037)	2.84-3.12 (.112-.123)	26	3.73 (0.147)	47.60 (1.875)

Can Standards
January 1, 1970

CAN STANDARDS

Industry Standards for 3 piece and 2 piece Sanitary Cans recommended for proper can seaming. The seam quality produced by the Can Seamer is greatly dependant on the quality of the Cans & Ends used.

(3 piece - Formed Body + Top & Bottom Lids)
(2 piece - Drawn Body + Top Lid)

3 three piece can movahed machinery automatic seamer 2 two piece can movahed machinery automatic seamer

COMMON NOMINAL DIA. (3 PIECE CANS)
ISO Size	Equivalent mm (inch)
202	52 (2.047)
207.5	60 (2.362)
209	63 (2.480)
211	65 (2.559)
300	73 (2.874)
303	78 (3.070)
307	83 (3.268)
401	99 (3.898)
404	105 (4.134)
502	127 (5.000)
603	152 (6.024)
700	175 (6.890)

showing 1 to 2 from 2 items

First Page

Previous Page Page 1 of 1 Next Page

Last Page

Content on this page requires a newer version of Adobe Flash Player.